<?php
/* -*- tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
# ***** BEGIN LICENSE BLOCK *****
# This file is part of Plume Framework, a simple PHP Application Framework.
# Copyright (C) 2001-2007 Loic d'Anterroches and contributors.
#
# Plume Framework is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Plume Framework is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
# ***** END LICENSE BLOCK ***** */
/**
* The main class of the framework. From where all start.
*
* The __autoload function is automatically set.
*/
class Pluf
{
/**
* Start the Plume Framework.
*
* Load the configuration files.
*
* @param string Configuration file to use
*/
static function start($config)
{
$GLOBALS['_PX_starttime'] = microtime(true);
$GLOBALS['_PX_uniqid'] = uniqid($GLOBALS['_PX_starttime'], true);
$GLOBALS['_PX_signal'] = array();
$GLOBALS['_PX_locale'] = array();
Pluf::loadConfig($config);
date_default_timezone_set(Pluf::f('time_zone', 'Europe/Berlin'));
mb_internal_encoding(Pluf::f('encoding', 'UTF-8'));
mb_regex_encoding(Pluf::f('encoding', 'UTF-8'));
}
/**
* Load the given configuration file.
*
* The configuration is saved in the $GLOBALS['_PX_config'] array.
* The relations between the models are loaded in $GLOBALS['_PX_models'].
*
* @param string Configuration file to load.
*/
static function loadConfig($config_file)
{
if (false !== ($file=Pluf::fileExists($config_file))) {
$GLOBALS['_PX_config'] = require $file;
} else {
throw new Exception('Configuration file does not exist: '.$config_file);
}
// Load the relations for each installed application. Each
// application folder must be in the include path.
self::loadRelations(!Pluf::f('debug', false));
}
/**
* Get the model relations and signals.
*
* If not in debug mode, it will automatically cache the
* information. This allows one include file when many
* applications and thus many includes are needed.
*
* Signals and relations are cached in the same file as the way to
* go for signals is to put them in the relations.php file.
*
* @param bool Use the cache (true)
*/
static function loadRelations($usecache=true)
{
$GLOBALS['_PX_models'] = array();
$GLOBALS['_PX_models_init_cache'] = array();
$apps = Pluf::f('installed_apps', array());
$cache = Pluf::f('tmp_folder').'/Pluf_relations_cache_'.md5(serialize($apps)).'.phps';
if ($usecache and file_exists($cache)) {
list($GLOBALS['_PX_models'],
$GLOBALS['_PX_models_related'],
$GLOBALS['_PX_signal']) = include $cache;
return;
}
$m = $GLOBALS['_PX_models'];
foreach ($apps as $app) {
$m = array_merge_recursive($m, require $app.'/relations.php');
}
$GLOBALS['_PX_models'] = $m;
$_r = array(
'relate_to' => array(),
'relate_to_many' => array(),
);
foreach ($GLOBALS['_PX_models'] as $model => $relations) {
foreach ($relations as $type => $related) {
foreach ($related as $related_model) {
if (!isset($_r[$type][$related_model])) {
$_r[$type][$related_model] = array();
}
$_r[$type][$related_model][] = $model;
}
}
}
$_r['foreignkey'] = $_r['relate_to'];
$_r['manytomany'] = $_r['relate_to_many'];
$GLOBALS['_PX_models_related'] = $_r;
// $GLOBALS['_PX_signal'] is automatically set by the require
// statement and possibly in the configuration file.
if ($usecache) {
$s = var_export(array($GLOBALS['_PX_models'],
$GLOBALS['_PX_models_related'],
$GLOBALS['_PX_signal']), true);
if (@file_put_contents($cache, '<?php return '.$s.';'."\n",
LOCK_EX)) {
chmod($cache, 0755);
}
}
}
/**
* Access a configuration variable.
*
* @param string Configuration variable
* @param mixed Possible default value if value is not set ('')
* @return mixed Configuration variable or default value if not defined.
*/
static function f($cfg, $default='')
{
if (isset($GLOBALS['_PX_config'][$cfg])) {
return $GLOBALS['_PX_config'][$cfg];
}
return $default;
}
/**
* Access an array of configuration variables having a given
* prefix.
*
* @param string Prefix.
* @param bool Strip the prefix from the keys (false).
* @return array Configuration variables.
*/
static function pf($pfx, $strip=false)
{
$ret = array();
$pfx_len = strlen($pfx);
foreach ($GLOBALS['_PX_config'] as $key=>$val) {
if (0 === strpos($key, $pfx)) {
if (!$strip) {
$ret[$key] = $val;
} else {
$ret[substr($key, $pfx_len)] = $val;
}
}
}
return $ret;
}
/**
* Returns a given object.
*
* Loads automatically the corresponding class file if needed.
* If impossible to get the class $model, exception is thrown.
*
* @param string Model to load.
* @param mixed Extra parameters for the constructor of the model.
*/
public static function factory($model, $params=null)
{
if ($params !== null) {
return new $model($params);
}
return new $model();
}
/**
* Load a class depending on its name.
*
* Throw an exception if not possible to load the class.
*
* @param string Class to load.
*/
public static function loadClass($class)
{
if (class_exists($class, false)) {
return;
}
$file = str_replace('_', DIRECTORY_SEPARATOR, $class) . '.php';
include $file;
if (!class_exists($class, false)) {
$error = 'Impossible to load the class: '.$class."\n".
'Tried to include: '.$file."\n".
'Include path: '.get_include_path();
throw new Exception($error);
}
}
/**
* Load a function depending on its name.
*
* The implementation file of the function
* MyApp_Youpla_Boum_Stuff() is MyApp/Youpla/Boum.php That way it
* is possible to group all the related function in one file.
*
* Throw an exception if not possible to load the function.
*
* @param string Function to load.
*/
public static function loadFunction($function)
{
if (function_exists($function)) {
return;
}
$elts = explode('_', $function);
array_pop($elts);
$file = implode(DIRECTORY_SEPARATOR, $elts) . '.php';
if (false !== ($file=Pluf::fileExists($file))) {
include $file;
}
if (!function_exists($function)) {
throw new Exception('Impossible to load the function: '.$function);
}
}
/**
* Hack for [[php file_exists()]] that checks the include_path.
*
* Use this to see if a file exists anywhere in the include_path.
*
* <code type="php">
* $file = 'path/to/file.php';
* if (Pluf::fileExists('path/to/file.php')) {
* include $file;
* }
* </code>
*
* @credits Paul M. Jones <pmjones@solarphp.net>
*
* @param string $file Check for this file in the include_path.
* @return mixed Full path to the file if the file exists and
* is readable in the include_path, false if not.
*/
public static function fileExists($file)
{
$file = trim($file);
if (!$file) {
return false;
}
// using an absolute path for the file?
// dual check for Unix '/' and Windows '\',
// or Windows drive letter and a ':'.
$abs = ($file[0] == '/' || $file[0] == '\\' || $file[1] == ':');
if ($abs && file_exists($file)) {
return $file;
}
// using a relative path on the file
$path = explode(PATH_SEPARATOR, ini_get('include_path'));
foreach ($path as $dir) {
// strip Unix '/' and Windows '\'
$target = rtrim($dir, '\\/').DIRECTORY_SEPARATOR.$file;
if (file_exists($target)) {
return $target;
}
}
// never found it
return false;
}
/**
* Helper to load the default database connection.
*
* This method is just dispatching to the function define in the
* configuration by the 'db_get_connection' key or use the default
* 'Pluf_DB_getConnection'. If you want to use your own function,
* take a look at the Pluf_DB_getConnection function to use the
* same approach for your method.
*
* The extra parameters can be used to selectively connect to a
* given database. When the ORM is getting a connection, it is
* passing the current model as parameter. That way you could get
* different databases for different models.
*
* @param mixed Extra parameters.
* @return resource DB connection.
*/
public static function &db($extra=null)
{
$func = Pluf::f('db_get_connection', 'Pluf_DB_getConnection');
Pluf::loadFunction($func);
$a = $func($extra);
return $a;
}
}
/**
* Translate a string.
*
* @param string String to be translated.
* @return string Translated string.
*/
function __($str)
{
$locale = (isset($GLOBALS['_PX_current_locale'])) ? $GLOBALS['_PX_current_locale'] : 'en';
if (!empty($GLOBALS['_PX_locale'][$locale][$str][0])) {
return $GLOBALS['_PX_locale'][$locale][$str][0];
}
return $str;
}
/**
* Translate the plural form of a string.
*
* @param string Singular form of the string.
* @param string Plural form of the string.
* @param int Number of elements.
* @return string Translated string.
*/
function _n($sing, $plur, $n)
{
$locale = (isset($GLOBALS['_PX_current_locale'])) ? $GLOBALS['_PX_current_locale'] : 'en';
if (isset($GLOBALS['_PX_current_locale_plural_form'])) {
$pform = $GLOBALS['_PX_current_locale_plural_form'];
} else {
$pform = Pluf_Translation::getPluralForm($locale);
}
$index = Pluf_Translation::$pform($n);
if (!empty($GLOBALS['_PX_locale'][$locale][$sing.'#'.$plur][$index])) {
return $GLOBALS['_PX_locale'][$locale][$sing.'#'.$plur][$index];
}
// We have no translations or default English
if ($n == 1) {
return $sing;
}
return $plur;
}
/**
* Autoload function.
*
* @param string Class name.
*/
function __autoload($class_name)
{
try {
Pluf::loadClass($class_name);
} catch (Exception $e) {
if (Pluf::f('debug')) {
print $e->getMessage();
die();
}
eval("class $class_name {
function __construct() {
throw new Exception('Class $class_name not found');
}
static function __callstatic(\$m, \$args) {
throw new Exception('Class $class_name not found');
}
}");
}
}
/**
* Exception to catch the PHP errors.
*
* @credits errd
* @see http://www.php.net/manual/en/function.set-error-handler.php
*/
class PlufErrorHandlerException extends Exception
{
public function setLine($line)
{
$this->line = $line;
}
public function setFile($file)
{
$this->file = $file;
}
}
/**
* The function that is the real error handler.
*/
function PlufErrorHandler($code, $string, $file, $line)
{
if (0 == error_reporting()) return;
if (E_STRICT == $code
&&
(
0 === strpos($file, Pluf::f('pear_path','/usr/share/php/'))
or
false !== strripos($file, 'pear') // if pear in the path, ignore
)
) {
return;
}
$exception = new PlufErrorHandlerException($string, $code);
$exception->setLine($line);
$exception->setFile($file);
throw $exception;
}
// Set the error handler only if not performing the unittests.
if (!defined('IN_UNIT_TESTS')) {
set_error_handler('PlufErrorHandler', error_reporting());
}
/**
* Shortcut needed all over the place.
*
* Note that in some cases, we need to escape strings not in UTF-8, so
* this is not possible to safely use a call to htmlspecialchars. This
* is why str_replace is used.
*
* @param string Raw string
* @return string HTML escaped string
*/
function Pluf_esc($string)
{
return str_replace(array('&', '"', '<', '>'),
array('&', '"', '<', '>'),
(string) $string);
}
accountmanagementengine